How to make your personal shelf utilizing MDF

We’ve received suggestions from an knowledgeable (Picture: Getty)

MDF, aka medium-density fibreboard, is a kind of engineered wooden that’s pretty simple to return by and work with.

If you wish to make a shelf with the stuff however you’ve by no means labored with it earlier than, it’s comprehensible that you may want a number of suggestions.

Thomas Goodman, development knowledgeable at MyJob, has talked us via use this readily-available and versatile materials to construct our personal cabinets.

What you’ll want

  • Spirit stage
  • Screwdriver
  • Hammer drill
  • Sandpaper
  • MDF boards
  • Support timbers
  • Tape measure
  • Wall plugs and screws
  • Paint (optionally available)
  • A respirator masks

Step 1 – Planning and measuring

Thomas says you need to start by measuring the area the place you need the shelf to go.

He provides: ‘Consider what you’ll be putting on prime of the shelf, so you possibly can decide the place will probably be greatest positioned.

‘If you are planning on installing more than one shelf, also be aware of how far apart they need to be spaced based on what you’re going to be putting on them.’

Step 2 – Cutting

Now’s the time to get your provides collectively.

‘You will need supporting timber pieces to ensure your shelf is safer and sturdier,’ says Thomas.

‘Each shelf wants 4 items, one on both sides, plus an extra one within the center if you’d like further assist.

‘Support is important if you’re planning on storing heavy objects on the shelf. Cut your items primarily based on the variety of cabinets you might be constructing.

‘MDF boards will often be cut in the size and shape needed at the store where you bought them. If the MDF boards haven’t been lower, these will even have to be measured and lower to dimension.’

If you do it your self, don’t overlook to put on a respirator masks and to be sure to’re chopping it in a well-ventilated setting, because the MDF will launch plenty of dusty particles when it’s lower that you simply gained’t wish to breathe that in.

You’ll wish to do the identical whereas drilling too.

Step 3 – Attach the assist construction

Thomas says you’ll very seemingly discover that your cabinets must have a assist construction.

‘The top of the structure needs to be in line with the top of the upper shelf,’ he provides.

‘Begin by screwing the first part of the structure to the back wall of the alcove – make sure it’s stage when you’re doing it. Next, begin becoming the edges after which lastly match the entrance strip

‘It’s a good suggestion to pre-drill holes within the timber to assist keep away from any countersinking or splitting. If you might be becoming multiple shelf, repeat this course of for every shelf – this can act because the body on your cabinets.’

Step 4 – The closing becoming

Now, you’ll be effectively previous the midway level – it’s time to get the final bits of becoming finished.

‘Next,’ Thomas explains, ‘match the shelf cladding by screwing the underside of the shelf to the supporting construction.

‘Place the top of the shelf over it and screw this in place for additional safety. Finally, screw the front panels onto the shelf.’

Step 5 – Painting the shelf

This final optionally available step relies upon purely in your private style.

If you do resolve to provide your shelf a lick of color, Thomas advises: ‘Before painting, fill in any holes and lightly sand to give a smooth finished-off appearance.’

Do you’ve a narrative to share?

Get in contact by emailing

MORE : How to place up DIY floating cabinets

MORE : An knowledgeable information to portray your fridge – the newest TikTok DIY pattern

MORE : DIY mum transforms damp caravan for underneath £3,000, saving hundreds on the challenge

Source hyperlink

Leave a Reply

Your email address will not be published.